Dixcel SD Type Brake Rotors Pair
Subaru STI 05-07 (5x114.3 Rear, 316 x 20mm)
This product is in stock & ready to be delivered.
This product has very limited stock remaining.
Product will be in stock soon.
This product is not ready for immediate dispatch and will ship in the timeframe displayed.
This product is not available at this time. Request ETA Information
Earn [points_amount] when you buy this item.
Description
Description
Slotted version of the PD OE Replacement Brake Rotors
The Dixcel PD Type Rear Brake Rotor is a direct OEM replacement of the factory rotors that provides better longevity and disc life over the standard rotors. The SD Slotting provides 20% MORE brake power of the non-slotted PD rotors. 6 slots is the standard for SD brake discs. The 6 slot pattern was selected after careful examination of factors such as pad wear, noise level, and gas ventilation.
The performance difference between forward and reverse rotations.
The slots are effective in both forward and reverse rotations. The reverse rotation has a higher friction level compared to forward rotation. But the downside is that the pad wear rate is higher for reverse rotation compared to forward rotation. Please look at the chart below to see the comparison between forward and reverse rotations.
The data above is based on our Z type pads. This test data is from testing on the street and race circuit. The values can vary depending on the pad material. Pad wear level also depends on the usage. At DIXCEL, we evaluated each discs characteristics.To achieve a high level of friction, we recommend the following setups. For discs with 6 slots, we recommend reverse rotation. For discs with 12 slots, we recommend forward rotation.
Increased corrosion protection!
On top of our usual product quality standards (product precision, surface hardness, and material composition [the ratio of materials like carbon and silicon]), we applied the DIXCEL anti-corrosion standard. Not only does corrosion ruin the brake discs appearance, it can also lead to the corrosion of the alloy wheels. At DIXCEL, all brake discs come with anti-corrosion coating, to protect discs and wheels from corrosion. The ideal type of anti-corrosion coating is used for each vehicle.
Cutting for balancing
All DIXCEL brake discs are checked for balance to prevent vibration. Correction of the balance is done by milling/cutting out the side of brake discs. This is a method taken by car manufacturers brake discs.
The DIXCEL SD series discs are for the users who want more braking power and better disc appearance when compared to their standard disc.
Features and Benefits
Features and Benefits
- Slots increase brake performance by up to 20% according to simulated testing.
- For the 6 slot brake discs, reverse rotation (slots pointing forward) is recommended for best brake performance.
- High carbon material is used for sports cars and vehicles with high brake loads to improve durability compared to conventional products.
- Slots are designed to rotate in a reverse direction to gain better "shaving effect".
- Offset slot pattern on outer/inner side of brake discs reduces brake judder.